当前位置：Home > Product > Holding tool > Hydraulic slip 
Hydraulic slip
相关介绍
WGY375 hydraulic slip is a kind of hydraulic operation tool for holding casing in oil and gas drilling operations. Suitable for use with 375 turntables, the hydraulic slip is compact, safe and reliable, reducing the labor intensity of workers and improving work efficiency. The equipment is installed on the turntable, keeping it level with the turntable, which is convenient for the power tongs to work. There is no need to build another working platform, achieving a clean and safe working environment. The torque that the equipment can provide is 35,000 ft-lb (48kN·m). When the sleeve is clamped, the slipped slack can tighten the sleeve, eliminating the need to use manual slips and back pliers.
1. Main parameters
a. Load: 500tons
b. Applicable casing diameter: 41/2"~133/8"
c. Turntable size: 371/2
d. Height: 35"
e. Maximum torque: 35,000ft-lb (48kN·m)
2. Hydraulic system
a. Maximum working pressure: 2500psi (17.5MPa), the maximum flow of hydraulic station is 120L/min
b. Loop line filter: 10μm;
c. Maximum working oil temperature: 82℃;
d. Before starting to operate the equipment, make the slip body move up and down alternately to eliminate the air in the hydraulic line;
1. Main parameters
a. Load: 500tons
b. Applicable casing diameter: 41/2"~133/8"
c. Turntable size: 371/2
d. Height: 35"
e. Maximum torque: 35,000ft-lb (48kN·m)
2. Hydraulic system
a. Maximum working pressure: 2500psi (17.5MPa), the maximum flow of hydraulic station is 120L/min
b. Loop line filter: 10μm;
c. Maximum working oil temperature: 82℃;
d. Before starting to operate the equipment, make the slip body move up and down alternately to eliminate the air in the hydraulic line;
| Slip body specification | Hold pipe diameter |
| in | |
| 51/2 | 41/2 |
| 5 | |
| 51/2 | |
| 75/8 | 65/8 |
| 7 | |
| 75/8 | |
| 73/4 | |
| 95/8 | 85/8 |
| 83/4 | |
| 95/8 | |
| 93/4 | |
| 97/8 | |
| 113/4 | 103/4 |
| 107/8 | |
| 113/4 | |
| 117/8 | |
| 14 | 133/8 |
给我们留言
- 上一篇：已经没有了
- 下一篇：已经没有了
欢迎关注如通股份